SciFigure AI logoSciFigure AI
Back to blog

Publishing & Journals

PLOS ONE Impact Factor, Publication Fee and How to Submit

PLOS ONE metrics and impact factor, the $2,477 publication fee, its seven publication criteria, Editorial Manager steps, TIFF/EPS figure specs and review times.

Nov 17, 2026SciFigure EditorialSciFigure Editorial
PLOS ONE Impact Factor, Publication Fee and How to Submit

PLOS ONE is the largest journal of the Public Library of Science, a non-profit open-access publisher. It takes research from more than 200 subject areas across the natural sciences, medicine, engineering and the related social sciences and humanities, and it judges papers on whether the work is sound rather than on how important the editors think it is. That one design choice explains most of what authors ask about it: why it publishes so many papers, why negative results are welcome, and why its review is a check of methods and conclusions rather than a contest for space.

This guide covers the questions people look up before they submit to PLOS ONE: the impact factor and the metrics PLOS does publish, the publication criteria, article types, the publication fee and how to get help with it, the Editorial Manager submission steps, the manuscript and figure rules, and how long review takes. Every figure comes from journals.plos.org or plos.org, except the CiteScore, SJR and SNIP, which come from Scopus. All pages were checked on 17 November 2026 and are listed under Sources.

PLOS ONE at a glance

ItemPLOS ONE
PublisherPublic Library of Science (PLOS), a non-profit
Access and licenceFully open access, CC BY
SelectionScientific validity, methodology and ethics, not perceived significance
Articles published in 202518,300 (PLOS metrics page)
Acceptance rate, 202526%
Median time to first decision, 202532 days
Median time to publication, 2025209 days
Publication fee (research articles)$2,477, payable on acceptance
Length limitsNone on words, figures or supporting information
Abstract300 words maximum
Reference styleVancouver
FiguresTIFF or EPS only, 300–600 dpi, 10 MB or less each
Submission systemEditorial Manager (editorialmanager.com/pone)

PLOS ONE impact factor and journal metrics

PLOS does not publish PLOS ONE's Journal Impact Factor on its own pages. The journal information page says PLOS does not consider the Impact Factor a reliable or useful way to assess individual articles, and PLOS's metrics page explains why: PLOS signed the San Francisco Declaration on Research Assessment (DORA) and does not promote journal-level citation metrics. It confirms that the Journal Impact Factor, SJR, CiteScore and h-index exist for all its journals and are "available from the respective databases".

So the official source of the PLOS ONE impact factor is Clarivate's Journal Citation Reports (JCR), which needs an institutional subscription. Clarivate releases each year's figures in June, so the value released in June 2026 is labelled 2025. We have not repeated numbers from third-party sites, because neither PLOS nor Clarivate's public pages show them; your library's JCR access will give you the official value and the journal's category rank.

What PLOS and Scopus do publish:

MetricValueSource
CiteScore 20254.8 (calculated 5 May 2026)Scopus
CiteScore rank 2025#38 of 223 in Multidisciplinary (83rd percentile)Scopus
SJR 20250.726Scopus
SNIP 20251.081Scopus
Citations, 20251,125,728 (from Dimensions)PLOS metrics page
Articles published, 202518,300PLOS metrics page
Acceptance rate, 202526%PLOS metrics page
Median time to first decision, 202532 daysPLOS metrics page
Median time to publication, 2025209 daysPLOS metrics page

The CiteScore is citations received in 2022–2025 by documents published in 2022–2025, divided by the number of those documents: 309,034 citations over 64,611 documents. Scopus's monthly CiteScoreTracker for 2026 was also 4.8 when we checked. PLOS says its 2026 journal metrics will appear in July 2027.

How to read these numbers. PLOS ONE's size is the main thing behind them. It publishes many thousands of papers a year across every field, so a citation average mixes fast-citing biomedical papers with slower fields. If an assessment committee asks for the impact factor, give the JCR value with its year; if you choose journals on fit, the criteria and the review times below matter more.

Scope and the seven publication criteria

PLOS ONE accepts original research across the natural sciences, medicine, engineering and related social sciences and humanities, including interdisciplinary work. Its editors check each paper against seven criteria, which we summarise here:

#CriterionWhat it means in practice
1Original researchPrimary research and methods. Narrative reviews, case reports, opinion pieces and monographs are not considered.
2Not published elsewhereNo prior publication and no parallel submission. Preprints, theses and conference presentations are allowed.
3High technical standardAppropriate controls, replication and sample sizes, with methods detailed enough to reproduce.
4Conclusions supported by the dataOverstated conclusions are grounds for rejection; speculation must be labelled as hypothesis.
5Intelligible, standard EnglishPLOS ONE does not copyedit accepted papers, so clarity is the authors' job.
6Ethics and research integrityApprovals for human, animal, cell-line, field and biosafety work, with COPE guidance on publication ethics.
7Reporting guidelines and data availabilityDiscipline reporting standards are followed and data are deposited in public resources.

Two things are deliberately missing from the list: impact and novelty. PLOS ONE says it aims to publish all valid research, including negative and null results. Replication studies are considered when the authors give a sound scientific rationale and discuss the existing literature; a replication without that justification will probably be rejected.

Article types

  • Research Article, the main format. Methods, software, databases and tools are published as Research Articles when they are the primary focus, and so are systematic reviews and meta-analyses, which must use explicit, systematic methods.
  • Clinical Trial, for studies that prospectively assign participants to a health-related intervention, with the trial-specific requirements on top.
  • Lab Protocol, a step-by-step protocol posted on protocols.io paired with a peer-reviewed PLOS ONE article.
  • Study Protocol, a detailed plan for a study of any type within scope.
  • Registered Report Protocol and Registered Report: the design is reviewed before data collection, the protocol is published, and the later research article is linked to it.
  • Commissioned only: Collection Reviews, Collection Overviews, Formal Comments and Topic Pages. Unsolicited Collection Reviews, Overviews and Formal Comments are not considered.

PLOS ONE publication fee (APC)

PLOS ONE charges an article processing charge, which PLOS calls the publication fee. It is payable on acceptance, at the rate in force on your submission date. There is no submission fee.

PLOS ONE article typePublication fee (USD)
Research Article and all other article types$2,477
Study Protocol$2,477
Lab Protocol$1,536
Registered Report Protocol$1,852
Registered Report (the article reporting the results)$1,088

A Registered Report therefore costs $2,940 across its two stages, a little more than a single Research Article.

Ways to pay less, or nothing:

  • Institutional partnerships. Many institutions have agreements with PLOS that cover or remove the fee for their authors. Check PLOS's list of partners, or ask your library, before budgeting the full fee.
  • Research4Life. Authors at institutions in Research4Life Group A countries who have no external funding for the study publish free. For Group B countries without external funding, the PLOS ONE fee falls to $940. You must ask for this at submission.
  • PLOS Publication Fee Assistance (PFA). For authors who can show financial need after exhausting other sources (institution, library, funders). Apply at submission, in the submission form; a decision usually arrives within 10 business days. Requests made during review or after acceptance are not considered, and editors and reviewers never see fee-assistance applications.

Do not ask for a waiver in the cover letter: PLOS ONE's guidelines say the cover letter must not include requests to reduce or waive publication fees. Fee arrangements go in the submission form.

How to submit to PLOS ONE

PLOS ONE submissions go through Editorial Manager at editorialmanager.com/pone. That is also where the author login is: register or sign in there, then choose Submit New Manuscript.

  1. Choose the article type: Research Article, Clinical Trial, Registered Report Protocol, Registered Report, Lab Protocol or Study Protocol.
  2. Upload each file separately and set its item type: cover letter, manuscript (DOC, DOCX or RTF, or a PDF if you write in LaTeX), each figure, and supporting information.
  3. Pick a subject category and any keywords. Keywords cannot be edited later.
  4. Set review preferences. Name any editors or reviewers who should not handle the paper, with reasons.
  5. Complete the additional information: financial disclosure, competing interests, ethics statement, data availability statement and repository, suggested Academic Editors, fee arrangements or assistance request, and any preprint.
  6. Opt in to a preprint if you want one. PLOS can post your submission to bioRxiv or medRxiv for you.
  7. Check the extracted data. Confirm the title, abstract, funding and author details, in the same order as the manuscript.
  8. Build and approve the PDF. Click "Build PDF for Approval", check the merged PDF, then "Approve". The manuscript number confirms the submission.

An unfinished submission waits under "Submissions Waiting for Author's Approval". The corresponding author must have an ORCID iD linked in their Editorial Manager profile when submitting.

Manuscript formatting rules

PLOS ONE is light on limits but strict on structure:

ItemPLOS ONE requirement
LengthNo limit on words, figures or supporting information
FileDOC, DOCX or RTF (not locked); LaTeX submitted as PDF first
LayoutDouble-spaced, single column, continuous line numbers and page numbers
Full title250 characters maximum, sentence case
Short title100 characters maximum
Abstract300 words maximum, no citations
HeadingsNo more than three levels
Cover letterOne page maximum, including suggested Academic Editors
ReferencesVancouver style, numbered in order of citation, in square brackets
Supporting informationAny file type, each under 20 MB, named S1 Table, S1 Fig and so on, with captions at the end of the manuscript
DataDeposited in a public repository unless included in the article; accession numbers or DOIs in the Data Availability Statement

Is there a PLOS ONE LaTeX template? Yes. PLOS provides a LaTeX template, which also works in Overleaf. At first submission, upload a PDF of the text, legends, tables and references, with the figures uploaded separately. You upload the .tex source only at acceptance or revision, merged into one file. PLOS recommends latexdiff to mark changes in the review PDF, and asks for no tracked changes in the final .tex file.

PLOS ONE figure requirements

PLOS ONE's figure rules are among the strictest of any large journal, and they are the most common reason a paper is held after acceptance. You can submit without meeting them, because the formatting requirements are waived until a provisional "Editorial Accept", but you will have to fix the files before the paper moves on.

RequirementPLOS ONE specification
File typesTIFF or EPS only (EPS made from LaTeX is not accepted)
Width789–2,250 pixels at 300 dpi (2.63–7.5 in, 6.68–19.05 cm)
Width to fit the text column5.2 in (13.2 cm) or less
Height2,625 pixels at 300 dpi maximum (8.75 in, 22.23 cm), excluding the caption
Resolution300–600 dpi
File size10 MB or less
ColourRGB (8 bits per channel) or greyscale
TIFF detailsLZW compression, flattened (no layers), no alpha channel, one page only
FontsArial, Times or Symbol, 8–12 pt; in EPS, embed the fonts or convert text to outlines
BorderA 2-point white border is recommended; crop other white space
File namesFig1.tif, Fig2.eps and so on, matching the caption label and the in-text citation
CaptionsIn the manuscript after the first paragraph that cites the figure, not in the file; label plus a title of 15 words or fewer

Practical points from PLOS's guidance:

  • Check every figure with NAAS, the free PLOS tool that checks figures against these specifications, resizes them and converts them to TIFF. Figures must be made at 300–600 dpi for it to process them. Do not run supporting-information figures through it.
  • Put multi-panel figures on one page in one file, or split them into separate figures and renumber. If you assemble panels in presentation software, use Insert rather than copy and paste or drag and drop, which yields 72 dpi images. Figures with many small elements look best at 600 dpi.
  • Do not put the figure number, title or caption inside the image, and no author names or article title either.
  • Watch the 72 dpi trap. PLOS warns that direct TIFF export from RStudio and screen-resolution export from Stata give 72 dpi files; export EPS, or set the physical size so the pixel count is right.
  • Image integrity: no adjustments that hide or misrepresent information, no features added, moved or removed, and spliced lanes marked with a thin line and explained in the legend. Uncropped blot and gel images go in one PDF named S1_raw_images, up to 20 MB.
  • Licensing: every figure is published under CC BY, so third-party material needs written permission, and maps must come from CC BY-compatible sources such as USGS or OpenStreetMap rather than Google Maps. PLOS also no longer considers submissions that depict or analyse the "Lena" test image.

Before uploading, check each file's pixel width against the 789–2,250 pixel range with the image DPI checker, and compare PLOS's limits with other publishers' in journal figure requirements by publisher.

PLOS ONE review process and timeline

  1. Initial checks. PLOS staff check competing interests, ethics, financial disclosure, data availability and editorial policy compliance. A submission can be sent back for fixes before it reaches an editor.
  2. Academic Editor. An Academic Editor with the right expertise, usually an Editorial Board member and occasionally a Guest Editor, checks the paper against the criteria and decides whether external review is needed.
  3. Peer review. Single-anonymized: reviewers are anonymous unless they sign. External reviewers are typically given 10 days to submit their report.
  4. Decision. Accept, Minor revision, Major revision or Reject, sent with the reviews.
  5. Revision. A revised manuscript usually returns to the same Academic Editor, who may decide alone or ask the reviewers again.
  6. Editorial Accept, then Formal Accept. Editorial acceptance is provisional, pending the technical and formatting checks (figures included). Once those pass, the journal office issues the formal acceptance and the paper goes to production.

Authors can opt in to publishing the peer review history with the paper. A rejected manuscript can be transferred to another PLOS journal only with your consent. Appeals go by email to the journal with an Appeal Request Form, and are considered only for a significant factual error or a documented competing interest that changed the outcome.

What the status in Editorial Manager means, as PLOS explains it:

StatusWhat is happening
Manuscript submittedInitial assessment and technical screening
Editor invitedPLOS is finding an Academic Editor
With editorAn Editorial Board member has the manuscript
Under reviewReviewers have been invited
Required reviews completeSome or all reviews are in
Decision in processA decision has been drafted but not yet sent

How long PLOS ONE takes. PLOS publishes median times twice: a detailed table on the journal information page, last filled in for January–June 2023, and the 2025 figures on the PLOS metrics page.

Median time (days)January–June 20232025
Submission to first editorial decision (desk rejection or sent to review)17not published
Submission to first decision4532
Submission to final decision87not published
Submission to acceptance188not published
Submission to publication204209
Acceptance to publication10not published
Desk rejection without review30.82%not published
Acceptance rate30.74%26%

Read the 209 days as roughly seven months from submission to publication for a typical accepted paper, most of it spent in review and revision, and plan grant reports and thesis deadlines accordingly.

Tips that save a revision round

  • Lead with rigour, not novelty. The editors are checking soundness, so a precise account of controls, sample sizes and statistics in the abstract and methods does more than a claim that the work is new.
  • Deposit the data before you submit. A missing or vague Data Availability Statement is one of the things the initial checks send back.
  • Follow the reporting guideline for your design (CONSORT, STROBE, PRISMA, ARRIVE and so on) and upload the checklist.
  • Fix the figures early. Build them at final size, export TIFF with LZW compression or EPS with embedded fonts, and run NAAS. It is far quicker than doing it after Editorial Accept.
  • Suggest Academic Editors who match your methods. The handling editor is an active researcher, and the right match speeds up reviewer invitations.
  • Sort out the fee before you submit. Check your institution's agreement and apply for Research4Life or PFA in the submission form; you cannot apply later.

PLOS ONE pre-submission checklist

  • The work is original research that meets all seven criteria, including the reporting guideline for its design.
  • Manuscript in DOC, DOCX or RTF (or a LaTeX PDF), double-spaced, single column, with line and page numbers.
  • Title under 250 characters, short title under 100, abstract of 300 words or fewer with no citations.
  • References in Vancouver style; captions placed after the first paragraph that cites each figure.
  • Cover letter of one page or less, with suggested Academic Editors and no fee requests.
  • Data deposited, with accession numbers or DOIs in the Data Availability Statement.
  • Ethics, funding and competing-interest statements ready for the form.
  • Each figure a separate TIFF or EPS, 789–2,250 pixels wide at 300 dpi, RGB, 10 MB or less, named Fig1, Fig2 and so on, and checked with NAAS.
  • Text in figures in Arial, Times or Symbol at 8–12 pt; colours checked in the colorblind simulator.
  • Uncropped blots and gels in S1_raw_images.
  • ORCID iD linked in Editorial Manager.
  • Fee budgeted at $2,477, or institutional cover, Research4Life or PFA requested in the form.

Frequently asked questions

What is the impact factor of PLOS ONE?

PLOS does not publish it. The official value is in Clarivate's Journal Citation Reports, which your library may subscribe to; the most recent edition, released in June 2026, is labelled 2025. PLOS's own metrics page lists other 2025 figures instead: 1,125,728 citations, 18,300 articles and a 26% acceptance rate. Scopus gives a 2025 CiteScore of 4.8.

How much does it cost to publish in PLOS ONE?

$2,477 for a Research Article and most other article types, $1,536 for a Lab Protocol, $1,852 for a Registered Report Protocol and $1,088 for the Registered Report that follows it. The fee is charged on acceptance at the rate in force on the day you submitted.

Can I get the PLOS ONE fee waived?

Authors in Research4Life Group A countries without external funding publish free, and Group B authors without funding pay $940. Others who cannot pay can apply to the PLOS Publication Fee Assistance program in the submission form; requests made later are not accepted. Your institution may also have an agreement that covers the fee.

Where is the PLOS ONE author login?

PLOS ONE uses Editorial Manager at editorialmanager.com/pone. Authors register and sign in there to submit, track the status of a manuscript and upload revisions.

What is the PLOS ONE acceptance rate?

26% in 2025, according to PLOS's metrics page. The journal information page gave 30.74% for January–June 2023, when 30.82% of submissions were rejected without peer review.

How long does PLOS ONE take to publish?

In 2025 the median was 32 days to a first decision and 209 days from submission to publication. In the first half of 2023, accepted papers were published a median of 10 days after acceptance.

Does PLOS ONE have a word limit?

No. There are no limits on word count, number of figures or supporting information. The limits that do apply are 250 characters for the title, 100 for the short title and 300 words for the abstract.

What figure format does PLOS ONE require?

TIFF or EPS only, at 300–600 dpi, between 789 and 2,250 pixels wide at 300 dpi, no more than 2,625 pixels high, RGB or greyscale, and 10 MB or less. TIFF files need LZW compression and no layers.

Does PLOS ONE publish negative results and replications?

Yes to negative and null results, which it explicitly aims to publish. Replication studies are considered when the authors give a sound rationale and discuss the earlier work.

Does PLOS ONE accept review articles?

Systematic reviews and meta-analyses, yes, as Research Articles. Narrative reviews are considered only when commissioned for a Collection.

Related guides and tools

Our journal submission figure checklist covers the checks every journal shares. If PLOS ONE is one of several options, compare it with another broad open-access journal in the eLife guide, where the publication model is different again. Write consistent legends with the figure legend generator.

Sources

Checked 17 November 2026.